LisaList2

Advanced search  

News:

I've successfully built LOS from source!: https://lisalist2.com/index.php/topic,644.0.html

Pages: [1]   Go Down

Author Topic: Two versions of Xenix on Bitsavers? Which one to start with?  (Read 28211 times)

Todd

  • Jr. Member
  • **
  • Karma: +5/-0
  • Offline Offline
  • Posts: 16
Two versions of Xenix on Bitsavers? Which one to start with?
« on: October 19, 2020, 09:16:01 am »
Hi,

(Forgive me if this is obvious, I did some searches and could not find an answer).

I am going to give a try to install Xenix on my 2/5. There are two version on Bitsavers and two boot disks:

http://www.bitsavers.org/bits/Apple/Lisa/xenix_3.0_rel1.0/

and

http://www.bitsavers.org/bits/Apple/Lisa/xenix_3.0_rel1.0/Xenix_3.0_rel_1_%2340067/



1. Which one do you suggest I start with?
2. What is the difference between the two?

Many Thanks,

Todd

PS - I am new to the list, please forgive ignorant questions.
Logged

blusnowkitty

  • Sr. Member
  • ****
  • Karma: +79/-0
  • Offline Offline
  • Posts: 267
Re: Two versions of Xenix on Bitsavers? Which one to start with?
« Reply #1 on: October 19, 2020, 10:19:44 am »
If you're using a real ProFile or Widget drive, use either XenixBoot.dc42 or boot.dc42. If you're using an X/ProFile emulator, use the Patched disk.
Logged
You haven't lived until you've heard the sound of a Sony 400k drive.

rayarachelian

  • Administrator
  • Hero Member
  • *****
  • Karma: +105/-0
  • Offline Offline
  • Posts: 772
  • writing the code,writing the code,writing the code
    • LisaEm
Re: Two versions of Xenix on Bitsavers? Which one to start with?
« Reply #2 on: October 19, 2020, 10:21:37 am »
Quote from: Todd on October 19, 2020, 09:16:01 am
I am going to give a try to install Xenix on my 2/5. There are two version on Bitsavers and two boot disks:

http://www.bitsavers.org/bits/Apple/Lisa/xenix_3.0_rel1.0/

and

http://www.bitsavers.org/bits/Apple/Lisa/xenix_3.0_rel1.0/Xenix_3.0_rel_1_%2340067/

1. Which one do you suggest I start with?
2. What is the difference between the two?

I think they are the same OS and version, but images taken from two different sets of disks / serial numbers. Also one of them has the extras such as text processing tools and compilers in the same directory, the others have them outside.

It likely won't matter which of the two you choose.

The only thing to worry about is if you're using an X/ProFile, in which case the boot disk needs patching to work properly. In which case, you should use the boot disk from this zip file: http://www.bitsavers.org/bits/Apple/Lisa/xenix_3.0_rel1.0/XenixBoot_patched_for_XProfile.dc42.zip
Logged
You don't know what it's like, you don't have a clue, if you did you'd find yourselves doing the same thing, too, Writing the code, Writing the code

Todd

  • Jr. Member
  • **
  • Karma: +5/-0
  • Offline Offline
  • Posts: 16
Re: Two versions of Xenix on Bitsavers? Which one to start with?
« Reply #3 on: October 19, 2020, 11:00:22 am »
Thank you so much! I'll report back.
Logged

Todd

  • Jr. Member
  • **
  • Karma: +5/-0
  • Offline Offline
  • Posts: 16
Re: Two versions of Xenix on Bitsavers? Which one to start with?
« Reply #4 on: October 19, 2020, 03:31:43 pm »
I'm in a little bit of shock. 4-ish hours later from download to make disks to install and... it worked!!!!

I used the one from here:

http://www.bitsavers.org/bits/Apple/Lisa/xenix_3.0_rel1.0/Xenix_3.0_rel_1_%2340067/

I haven't dug in yet, but I didn't have enough room for the "development system".

Would like to see if I can login from my laptop hooked up to the serial port!

Thanks so much,

Todd
Logged
Pages: [1]   Go Up
« previous next »