LisaList2

Advanced search  

News:

2022.06.03 added links to LisaList1 and LisaFAQ to the General Category

Pages: [1]   Go Down

Author Topic: LisaVision  (Read 3179 times)

blusnowkitty

  • Sr. Member
  • ****
  • Karma: +69/-0
  • Offline Offline
  • Posts: 244
LisaVision
« on: May 24, 2021, 01:06:01 pm »

So I found something strange here...

http://adam.trideja.com/Apple%20Computer%20Pics/Lisa/Lisa%20Vision/

Does anyone know what this thing is?

(By the way, lots of cool pictures are in the other folders there - worth a look)
Logged
You haven't lived until you've heard the sound of a Sony 400k drive.

conmega

  • Newbie
  • *
  • Karma: +3/-0
  • Offline Offline
  • Posts: 6
Re: LisaVision
« Reply #1 on: May 24, 2021, 02:02:13 pm »

I'd assume something that tied into an adjustment, like width, and let you switch between two set adjustments with the flip of a switch. Handy if your running macworks as a dual boot configuration.
Logged

stepleton

  • Sr. Member
  • ****
  • Karma: +109/-0
  • Offline Offline
  • Posts: 384
Re: LisaVision
« Reply #2 on: May 24, 2021, 05:49:06 pm »

No idea, but I remember that one of the things that VintageMicros et al. found in their board reproduction was a way to switch the Lisa to use inverse video on its display (white on black). The name "LisaVision" might be a good match for this. I don't know why that product would require variable resistors, though: I would have expected something like the inverse video trick just to monkey with some logic lines, and for that a fixed-value pulldown or pullup resistor would do the trick.

ETA: Wow, lots of interesting pictures there, as you say! This one might be a new entry for your catalogue: http://adam.trideja.com/Apple%20Computer%20Pics/Lisa/Lisa%201/Prototype%20Lisa%201/
« Last Edit: May 24, 2021, 05:54:05 pm by stepleton »
Logged

stepleton

  • Sr. Member
  • ****
  • Karma: +109/-0
  • Offline Offline
  • Posts: 384
Re: LisaVision
« Reply #3 on: May 25, 2021, 04:48:48 am »

LOL nevermind, conmega is right and Ray spotted it in 2007:

https://lisalist2.com/lisalist1/0974.html

or search in http://www.macmothership.com/lisacontent/signal/Signal23_April1985.html for "Pixel Switch Available". In that application, the two pots completely make sense as replacements for the vsize pot on the video board: you'd have one tuned for tall Lisa pixels and another for square Mac pixels.
Logged

compu_85

  • Sr. Member
  • ****
  • Karma: +66/-0
  • Offline Offline
  • Posts: 233
Re: LisaVision
« Reply #4 on: June 02, 2021, 10:20:39 pm »

On my 2/5 adjusting the height to its minimum makes the ratio about perfect for MacWorks.

This is the same as lifting the wiper pin from the height adjustment pot. If I can find an appropriate switch I will probably hook it up like that.

-J
Logged
Pages: [1]   Go Up