General Category > LisaList2

BLU LLF Failing

(1/2) > >>

blusnowkitty:
Any clues on why low-level formatting a 5MB Profile with BLU is failing during the Spare Sector format? I keep seeing Status 00000001 or 00000003 midway through the Spare Sector format.

blusnowkitty:
So, found an old post on LisaList1 where Jason ran into the same problem. I'm seeing the same thing as well, ??????? as device name and completely nonsensical sizes in BLU. But the fun thing is... Office System can still format and install to the drive without issue regardless?

https://lisalist2.com/lisalist1/2682.html

compu_85:
I was just going to reply that I ran into this same problem formatting ProFiles in BLU  :-\

AlexTheCat123:
I've had the same issue too.

patrick:

--- Quote from: blusnowkitty on September 25, 2021, 11:19:46 pm ---Any clues on why low-level formatting a 5MB Profile with BLU is failing during the Spare Sector format? I keep seeing Status 00000001 or 00000003 midway through the Spare Sector format.

--- End quote ---

This is no fault. It just means that 1 resp. 3 spare blocks are in use. As long as this number is below 0x1F your drive will be useable.

Navigation

[0] Message Index

[#] Next page