General Category > LisaList2

My first custom-made mechanical keyboard... made for an Apple Lisa

<< < (2/2)

RebeccaRGB:
The PCB I had made by PCBWaaaaaaaay: https://www.pcbway.com/project/shareproject/LisaKeysPlus.html

The keyswitches I got from Max Keyboards: https://www.maxkeyboard.com/cherry-mx-red-keyswitch-mx1a-l1nn-soft-linear.html (I went with Reds since the original keys have no bump and no click.)

The keycaps I had printed also by Max Keyboards. One full custom ANSI 104-key set with 6.5u spacebar, and five custom singles (R2 1x1 for numpad comma; R2 1x1.75 (Caps) for return; R1 1x2.25 (L.Shift) for right shift; R1 1x2.0 (Numpad 0) for command (Apple); R1 1x2.0 (Numpad 0) for enter). Artwork here: https://github.com/RebeccaRGB/lisakeysplus/tree/main/keycaps

To prevent the PCB from flexing I designed a bracket that fits in the lower half of the case and 3D printed it myself. Four of them for best support. https://github.com/RebeccaRGB/lisakeysplus/tree/main/mounting-bracket

Navigation

[0] Message Index

[*] Previous page