LisaList2

Advanced search  

News:

2022.06.03 added links to LisaList1 and LisaFAQ to the General Category

Pages: [1] 2   Go Down

Author Topic: Looking for an X/ProFile (or two)  (Read 5270 times)

ried

  • Sr. Member
  • ****
  • Karma: +12/-0
  • Offline Offline
  • Posts: 85
Looking for an X/ProFile (or two)
« on: January 26, 2023, 02:52:25 pm »

I understand that the X/ProFile drive was sold by VintageMicros for a number of years, but they are no longer available for sale:

http://sigmasevensystems.com/xprofile



I'm looking for a couple of these, for my Lisa 2 and Apple /// (the latter requires an X/ProFile voltage regulator, too). If anyone has one (or more) of these and would be willing to part with it, please let me know. Thank you :)
Logged

blusnowkitty

  • Sr. Member
  • ****
  • Karma: +69/-0
  • Offline Offline
  • Posts: 244
Re: Looking for an X/ProFile (or two)
« Reply #1 on: January 26, 2023, 03:05:01 pm »

Any reason why the X/ProFile in particular? I'd probably go with a Cameo Aphid these days: https://github.com/stepleton/cameo/blob/master/aphid/README.md

It's a little more DIY, but pretty much all the PCB fab houses also do board assembly, and at least on the Lisa you get the very nice Cameo Selector utility: https://lisalist2.com/index.php/topic,143.0.html
Logged
You haven't lived until you've heard the sound of a Sony 400k drive.

ried

  • Sr. Member
  • ****
  • Karma: +12/-0
  • Offline Offline
  • Posts: 85
Re: Looking for an X/ProFile (or two)
« Reply #2 on: January 26, 2023, 03:29:03 pm »

Any reason why the X/ProFile in particular? I'd probably go with a Cameo Aphid these days: https://github.com/stepleton/cameo/blob/master/aphid/README.md

Thanks for the informative reply. I do have a very nice Cameo/Aphid drive emulator from ArcaneByte. It's a great external drive solution, especially when paired with the 2-port Parallel Card.

http://www.arcanebyte.com/harddrive-product/

I'm interested in the X/ProFile as an internal drive solution, using the Lisa's internal drive power connector, to replace my non-working Widget. It also more closely matches the layout of the Widget, which I find appealing for an internal solution.
Logged

stepleton

  • Sr. Member
  • ****
  • Karma: +109/-0
  • Offline Offline
  • Posts: 384
Re: Looking for an X/ProFile (or two)
« Reply #3 on: January 26, 2023, 04:13:27 pm »

Thanks for the nice words about Cameo/Aphid :-)
If there winds up being no way to get an X/ProFile, then another option could be the IDEFile http://john.ccac.rwth-aachen.de:8000/patrick/idefile.htm . It's closer to the correct shape, although you may have to make some mounting hardware, and you do have to assemble it all yourself. It's a highly reliable device that I've been using for nearly ten years now!
Logged

Lisa2

  • Administrator
  • Sr. Member
  • *****
  • Karma: +64/-0
  • Offline Offline
  • Posts: 153
  • See why 1983 was more like Y2K...
    • Lisa2.com
Re: Looking for an X/ProFile (or two)
« Reply #4 on: January 26, 2023, 06:24:00 pm »

New X/Profile's are definitely still available for sale and fully supported.  I know there is one in-stock ready to go and more available.
PM me and I will get you in touch with the seller.
Rick
« Last Edit: January 26, 2023, 06:45:57 pm by Lisa2 »
Logged

ried

  • Sr. Member
  • ****
  • Karma: +12/-0
  • Offline Offline
  • Posts: 85
Re: Looking for an X/ProFile (or two)
« Reply #5 on: January 26, 2023, 08:38:10 pm »

Thanks for the nice words about Cameo/Aphid :-)
If there winds up being no way to get an X/ProFile, then another option could be the IDEFile http://john.ccac.rwth-aachen.de:8000/patrick/idefile.htm . It's closer to the correct shape, although you may have to make some mounting hardware, and you do have to assemble it all yourself. It's a highly reliable device that I've been using for nearly ten years now!

Nice to see you here, friend! I did join this forum at your suggestion, so thanks again for directing me. Seems perfect for a geek with a newfound appreciation for the Lisa  ;D

That certainly is a neat project, too. I'm afraid it might be a little beyond my abilities at this time, but I'll keep that in mind as a long-term project.
Logged

ried

  • Sr. Member
  • ****
  • Karma: +12/-0
  • Offline Offline
  • Posts: 85
Re: Looking for an X/ProFile (or two)
« Reply #6 on: January 26, 2023, 08:38:54 pm »

New X/Profile's are definitely still available for sale and fully supported.  I know there is one in-stock ready to go and more available.
PM me and I will get you in touch with the seller.
Rick

Thank you, sir. PM'd.
Logged

stepleton

  • Sr. Member
  • ****
  • Karma: +109/-0
  • Offline Offline
  • Posts: 384
Re: Looking for an X/ProFile (or two)
« Reply #7 on: January 27, 2023, 02:23:38 pm »

Nice to see you here, friend! I did join this forum at your suggestion, so thanks again for directing me. Seems perfect for a geek with a newfound appreciation for the Lisa  ;D

Howdy! As long as you're here, you might want to try asking your question about the sick Widget in a new thread, as there are more proficient experts here than me. I hope it's improving...
Logged

ried

  • Sr. Member
  • ****
  • Karma: +12/-0
  • Offline Offline
  • Posts: 85
Re: Looking for an X/ProFile (or two)
« Reply #8 on: February 07, 2023, 07:02:18 pm »

Well, thanks to another forum member I was able to purchase an X/ProFile and add it to my Lisa 2/10. Short story: It's fantastic. While I would have liked to get the original Widget working properly, and tried to for weeks, that is unfortunately beyond my hardware (oscilloscope) and skillset at this time. It's something I do plan to continue as a long-term effort, however. I think dialing in the pots to their correct values may still yield a working drive.

But the X/ProFile is also silent and, after listening to the noisy Widget bearings for 80+ hours I was ready for something quieter (so was my wife). Simple to install and easy to swap out the compact flash cards to try different operating systems (Lisa Office System, MacWorks, Xenix, etc.). The activity LED even lines up with the Lisa's front cover perfectly to reflect disk access. Happy that these are available for these wonderful old machines.



« Last Edit: February 08, 2023, 03:04:49 am by ried »
Logged

compu_85

  • Sr. Member
  • ****
  • Karma: +66/-0
  • Offline Offline
  • Posts: 233
Re: Looking for an X/ProFile (or two)
« Reply #9 on: February 08, 2023, 12:55:21 am »

One of these days I'm going to benchmark the IDEFile against the XProfile. The IDEFile seems faster   ???

-J
Logged

sigma7

  • Administrator
  • Sr. Member
  • *****
  • Karma: +127/-0
  • Offline Offline
  • Posts: 311
  • Warning: Memory errors found. Verify comments.
Re: Looking for an X/ProFile (or two)
« Reply #10 on: February 08, 2023, 04:37:35 am »

One of these days I'm going to benchmark the IDEFile against the XProfile. The IDEFile seems faster   ???

Some time and effort was spent maximizing the performance of the X/ProFile, I don't think a ProFile emulator could be made much faster than it is. Note that the media used can have a major effect on the speed; there are lots of speed grades of flash cards, and a well worn CF card may write more slowly than it was when new.

A benchmark of all the hard drives would be interesting and perhaps useful. Establishing some kind of test that could be done by anyone would be helpful so rare devices could be included.
Logged
Warning: Memory errors found. ECC non-functional. Verify comments if accuracy is important to you.

patrick

  • Sr. Member
  • ****
  • Karma: +85/-0
  • Offline Offline
  • Posts: 103
    • Patrick's Hardware Page
Re: Looking for an X/ProFile (or two)
« Reply #11 on: February 08, 2023, 09:39:02 am »

During the IDEfile development I did some speed tests with different hard drives: http://john.ccac.rwth-aachen.de:8000/patrick/idefile.htm#benchmarks

Today, most people will probably use CF cards or disk-on-modules, which are much faster than hard drives. With these solid-state drives, the transfer time of the ProFile bus interface dominates, the access time of the drive is negligible.
« Last Edit: February 08, 2023, 09:40:59 am by patrick »
Logged

ried

  • Sr. Member
  • ****
  • Karma: +12/-0
  • Offline Offline
  • Posts: 85
Re: Looking for an X/ProFile (or two)
« Reply #12 on: March 30, 2023, 04:37:25 pm »

Just saw that these are now back in stock at VintageMicros:
http://vintagemicros.com/catalog/lisa-xprofile-p-307.html

Here's a shot of my Lisa 2/5 booting Lisa Office System 1.0 from its X/ProFile, too 8)
Logged

andrew

  • Sr. Member
  • ****
  • Karma: +10/-0
  • Offline Offline
  • Posts: 60
  • :)
    • Lisa themed website (under construction)
Re: Looking for an X/ProFile (or two)
« Reply #13 on: March 31, 2023, 07:53:01 pm »

Here's a shot of my Lisa 2/5 booting Lisa Office System 1.0 from its X/ProFile, too 8)

Where can I find non-twiggy disk images of LOS 1.0? I want to install it on my 2/10.
Logged

ried

  • Sr. Member
  • ****
  • Karma: +12/-0
  • Offline Offline
  • Posts: 85
Re: Looking for an X/ProFile (or two)
« Reply #14 on: March 31, 2023, 10:02:11 pm »

Here's a shot of my Lisa 2/5 booting Lisa Office System 1.0 from its X/ProFile, too 8)

Where can I find non-twiggy disk images of LOS 1.0? I want to install it on my 2/10.

http://vintagemicros.com/catalog/lisa-card-p-315.html
Logged
Pages: [1] 2   Go Up