General Category > Lisa Troubleshooting and Repair

Widget 82 error.

<< < (2/4) > >>

bmwcyclist:

--- Quote from: sigma7 on April 02, 2025, 02:16:45 pm ---Although I suspect BLU won't be helpful here compared to something like https://github.com/stepleton/NeoWidEx, I think the straight DC42 file should work after unzipping, is that not the case?

--- End quote ---

The unzipped NeoWidEx is also .dc42. FloppyEMU is not seeing it. Not sure how to get this in a format I can boot from.

bmwcyclist:

--- Quote from: AlexTheCat123 on April 02, 2025, 05:27:32 pm ---
I'd suggest hooking the drive up to either NeoWidEx or your ESProFile (with the switch on the ESProFile PCB flipped to the DIAG position) next. If you choose ESProFile, just connect to the board over serial at 115200 baud to access the diagnostic interface.


--- End quote ---

I connected to the ESProfile.

Menu comes up and I get the "clunk" of the solenoid but I think my terminal settings might be wrong because when I try to choose a menu item I get garbage (screenshot attached)

AlexTheCat123:
ESProFile's tester mode uses ANSI escape codes to clear the screen between commands and move the cursor around, so try switching to a program that supports them. The garbage characters you're seeing are the escape codes, so clearly your current program doesn't support them. I don't use Windows much, so I don't have any concrete suggestions off the top of my head, but a quick search suggests that Microsoft Terminal might support them.

sigma7:

--- Quote from: AlexTheCat123 on April 04, 2025, 12:59:23 pm ---uses ANSI escape codes ... try switching to a program that supports them

--- End quote ---

I think this effectively means "try changing your terminal software's settings to emulate a smart terminal eg. VT100, instead of TTY."

(Then if your software can't do "smart terminal" try a different emulator.)

AlexTheCat123:

--- Quote from: sigma7 on April 04, 2025, 01:37:34 pm ---I think this effectively means "try changing your terminal software's settings to emulate a smart terminal eg. VT100, instead of TTY."

(Then if your software can't do "smart terminal" try a different emulator.)

--- End quote ---


Yeah, exactly!

Navigation

[0] Message Index

[#] Next page

[*] Previous page