General Category > LisaList2

Lisa 2/10 Remote Desktop using miniVNC in MacWorks Plus II First Connection Demo

<< < (2/3) > >>

bmwcyclist:
Hello Rick!

YES! very cool. Timbucktu is only old mac to older mac correct??

You are the same Rick in this one yes? https://youtu.be/BJqkBN8TZkc?si=otMC55BzlIhJs5FX that video is what inspired me to recreate what you had done, and also part of my inspiration to even get a LISA.

How do you have your Lisa connected to the AppleTalk Gateway?

I doubt I can find any of the hardware gateways, but if you can provide more information on the products, I will keep an eye out.

Do you have a BlueSCSI, and if so, have you tested it against the hardware gateways?

Note: you might be missing a close bracket for your URL insert...




--- Quote from: Lisa2 on June 26, 2025, 12:30:52 pm ---BTW, I have been doing remote control with my Lisa's for over 30 years now using Timbuktu.

I few years back I even had a friend in London operating my Lisa in Chicago via tunneling Appletalk over the internet using Gatorboxes.   Timbuktu supports both Appletalk and TCIP connections.

This is a video of that event:

https://youtu.be/YunR4Uwfeeg

Rick

--- End quote ---

bmwcyclist:
Looks like you posted while I was replying!

Well, that answers one question!


--- Quote from: Lisa2 on June 26, 2025, 02:27:17 pm ---And finally, here is a video of my Lisa running miniVNC:

https://youtu.be/BJqkBN8TZkc?si=KIqBemPl9QZ66S67

Rick

--- End quote ---

Lisa2:
Timbuktu (technically Timbuktu Pro) was not only for Mac's but did support Windows also.  I not sure if it's works with Windows 10, or 11 but remember using with it with Windows XP.

Talking details about gateways would require it's own thread.  I use Gatorboxes, but I also have used MacIPRpi https://macip.net/, and IPnetrouter https://www.sustworks.com/site/prod_ipr_overview.html
Depending on the gateway you may also need a LocalTalk bridge like the AstanteTalk or run Localtalk bridge on another Mac.

There are many ways to get Lisa (running MW+II) online and I have tried them all over the years.  While SCSI based ethernet (including BlueSCSI emulation)works fine, I prefer to use LocalTalk (Serial port B).

Rick

bmwcyclist:
Do you want to start the thread?


--- Quote from: Lisa2 on June 26, 2025, 05:46:20 pm ---
Talking details about gateways would require it's own thread.
Rick

--- End quote ---

Lisa2:
To learn about gateways, I highly recommend you start here:

http://www.applefool.com/se30/

Rick

Navigation

[0] Message Index

[#] Next page

[*] Previous page