Atari SM124

[mst3k]

One of my Lisa's has a broken neck.

In searching this website and others it appears that my best bet for a replacement CRT would be the Goldstar tube from an Atari SM124 mono monitor.

I can't seem to find direct Clinton replacements for the model of the CRT in my poor 'Lisa with the broken neck' and was wondering if anyone was aware of other Clinton models that would work?  I realize the yoke from my broken CRT would have to be transferred, but other than the SM124 are there other options you may have found?

One last 'parts' question; years ago I picked up a couple of the knurled closure screw mechanisms for the back panel of a Lisa from John at Vintage Micros.  John called them Rear Panel Screw Locks.   Not knowing if/when Vintage Micros will start up again and if they still have those available, does anyone know a source for those items or a suitable substitute?

Thank you.
   

[ried]

The original Lisa CRT is a Clinton CEULC99F1ATE, and very occasionally you'll be able to find NOS items on eBay from an industrial equipment supplier. I have not found another Clinton model that is a direct fit replacement, unfortunately.

If you don't mind using the Atari SM124 CRT, it's a very good drop-in replacement and I've put one of those into my Lisa 2/5 with good results. They're actually very nice CRTs and look at least as good as the Clinton originals, IMHO.

Good question on the rear panel screw locks. I'm not sure where those can be sourced anymore. Hopefully someone else knows.

[sigma7]

years ago I picked up a couple of the knurled closure screw mechanisms for the back panel of a Lisa from John at Vintage Micros.

These may work:

https://www.mcmaster.com/1626A42/

Code Select Expand

Adjustable-Tension Tight-Hold Cam Latch
with Knob, Zinc-Plated Steel, 1/16" to 1/4" Latching Distance