LisaList2
General Category => LisaList2 => Topic started by: kewatsdop on January 29, 2022, 09:44:04 am
-
OK, there must be something obvious I'm missing here. Trying to copy files to a "beep.dc42" diskette on a Mac, LisaEm 3rd Release Candidate of 1.2.7. Here's how I proceed:
1. File -> Insert blank diskette.
2. Name it beep.dc42 and save.
3. Start Workshop.
4. Go to File Manager -> Online.
I can't see the diskette device to mount or to initialize.
Where do I find the diskette I just inserted so that I can initialize/mount it?
Online devices only show for me:
#15#1 ALTCONSOLE
#15#2 MAINCONSOLE
#10#1 RS232A <printer>
#11 PARAPORT AOS 3.0
-
File names in the LPW/LOS operating system are weird. Instead of using / or \ as a separator, they use -
And weirdly enough LOS file names can and do contain / characters as you'll see here: https://www.highcaffeinecontent.com/blog/20140527-Lisa-Pascal-Development-in-Lisa-Workshop
So the root is just - and the devices are # followed by a number and then another separator. So "-#13-=" means current directory in 13 (I think)
equivalent on Linux/macos would be /13/.
Edit: just tried it.
The Sony 400k Floppy device is "-#13-" on LPW but when you insert the floppy disk it, you'll have to use the F)ILE-MGR menu to do that.
1. Press F to get to File Manager
2. Press ? to see the 2nd set of commands (probably can be skipped)
3. Press I to "Initialize" the device
4. type in "-#13" without quotes and hit enter.
5. Then hit Enter again for whole device.
6. Give it a name, I'd suggest the same name as the dc42 file without the dc42 extension. i.e. sounds
7. Hit enter for max number of files (it's 56) - this will create that many extents (inodes)
-
It worked!!! Thank you. I attached the diskette image to the thread on Pascal program.
I'll now try to build an executable diskette (be patient with me...).