LisaList2

General Category => LisaList2 => Topic started by: bmwcyclist on April 04, 2025, 10:00:06 pm

Title: 3D printed LISA feet work great
Post by: bmwcyclist on April 04, 2025, 10:00:06 pm
I got rid of my 3D printers a couple of years ago but I had a friend that printed of a set of TPU feet using the thingaverse model.

 
Title: Re: 3D printed LISA feet work great
Post by: andrew on April 08, 2025, 12:16:24 am
It's worth mentioning they still make rubber feet you can use which are similar to the originals, like these on Digikey: https://www.digikey.com/en/products/detail/3m/SJ-5523-GRAY/30827 (https://www.digikey.com/en/products/detail/3m/SJ-5523-GRAY/30827)
Title: Re: 3D printed LISA feet work great
Post by: stepleton on April 08, 2025, 03:43:53 am
Has anyone found replacements for the taller feet used by ProFiles?
Title: Re: 3D printed LISA feet work great
Post by: andrew on April 08, 2025, 04:43:33 am
Has anyone found replacements for the taller feet used by ProFiles?

I think it's these but I'm not 100% sure: https://www.digikey.com/en/products/detail/3m/SJ-5514-GRAY/102595 (https://www.digikey.com/en/products/detail/3m/SJ-5514-GRAY/102595) At the very least they are similar.
Title: Re: 3D printed LISA feet work great
Post by: bmwcyclist on April 08, 2025, 10:33:01 am
WOW. I need to remember to resize images before I post them!

One thing of note is that the printed feet (at least for me) stay on better and fit into the Lisa's plastic molding.
Title: Re: 3D printed LISA feet work great
Post by: stepleton on April 08, 2025, 06:08:18 pm
I think it's these but I'm not 100% sure: https://www.digikey.com/en/products/detail/3m/SJ-5514-GRAY/102595 (https://www.digikey.com/en/products/detail/3m/SJ-5514-GRAY/102595) At the very least they are similar.

That looks a LOT like them. Bookmarking now, thanks!