LisaList2

General Category => LisaList2 => Lisa Troubleshooting and Repair => Topic started by: friedboard on August 06, 2025, 03:36:24 am

Title: How long should Lisa 2 service mode tests take?
Post by: friedboard on August 06, 2025, 03:36:24 am

Lisa boots and passes self tests, but if I go into service mode by pressing apple + s, then performance any self test, it gets stuck on the TESTING... screen indefinitely. What could be the issue?

Title: Re: How long should Lisa 2 service mode tests take?
Post by: patrick on August 06, 2025, 10:25:17 am

No fault. These are loop tests, so the test runs until some failure occurs or you press Reset.

This is used to confirm proper operation after repairs. Leave it running overnight, then you can be sure that the customer gets back a fully working system with no intermittent faults left.

These are the same tests that are performed once during startup.

Title: Re: How long should Lisa 2 service mode tests take?
Post by: friedboard on August 06, 2025, 11:42:11 pm

Oh nice, I see! Are these the exact same tests that run are startup or is it a more extensive test?