LisaList2

General Category => LisaList2 => Lisa Troubleshooting and Repair => Topic started by: bmwcyclist on November 15, 2026, 01:28:04 PM

Title: 92 error on SCSI card
Post by: bmwcyclist on November 15, 2026, 01:28:04 PM
This guy has been working fine until just recently. Getting a 92 error.

Any help or suggestions?

IMG_7103.jpeg
Title: Re: 92 error on SCSI card
Post by: sigma7 on November 15, 2026, 02:20:04 PM
Quote from: bmwcyclist on <strong>Today</strong> at 01:28:04 PMGetting a 92 error.

Likely poor contact in the card edge connector.

Clean the card's edge contacts with IPA, or if necessary due to oxidation, very gently with a pencil eraser (don't erase the gold).

Put it back in the slot, close the cam, and shift the card up and down a few times (slightly, it won't move far) to 'wipe' the contacts. Double check the contacts are properly aligned before turning the power on again.