News:

I've successfully built LOS from source!: https://lisalist2.com/index.php/topic,644.0.html

Main Menu

What the heck is this hard drive???

Started by AlexTheCat123, April 05, 2023, 06:53:33 PM

Previous topic - Next topic

compu_85

I guess that's in theory? the 10mb Profiles I have seem faster than the 2 Widgets I have which work.

Which is annoying considering they are so much more syphocated than yee olde stepper drive.

No Nisa drives shipped to customers, right?

ried

#16
Here's a dump of the internal ProFile ("Pepsi") controller board Z8 piggyback ROM, attached. The original ROM is a Motorola MCM2716C. Interestingly, it's the exact same code as a regular ProFile! It seems that one would be able to convert a 5MB internal ProFile to the 10MB variant using a standard 10MB ProFile's components, too.

================================================================================
Apple Internal ProFile ("Pepsi") Prototype Hard Drive Controller Z8 ROM
================================================================================

OVERVIEW & MATCH SUMMARY
------------------------
Firmware dump from the piggyback UV EPROM (Motorola MCM2716C) on the Synertek Z8-03
microcontroller of an unreleased Apple "internal ProFile" (codenamed "Pepsi")
5MB hard drive controller board for the Apple Lisa.

Byte-for-byte verification confirms an exact match with Apple's production 5MB
external ProFile Z8 controller firmware, part number 341-0080-B (Rev B; MD5:
bd4df30e9ea432a547295b26a2cc4d28), available via Bitsavers. The internal prototype
utilizes the standard parallel handshake and ST-506 drive control code.

TECHNICAL & DUMP SPECS
----------------------
- System / Target: Apple Lisa (Prototype Internal "Pepsi" ProFile)
- Controller / EPROM: Synertek Z8-03 MCU with Motorola MCM2716C (2K x 8-bit, +5V UV EPROM)
- Capacity & Range: 2,048 bytes (0x0000 - 0x07FF)
- Dump Info: Dumped Nov 16, 2026 by ried (LisaList2) using Xgecu T48 (Xgpro v13.16)
- Checksums:
  * CRC32:  0x26df0b8d
  * MD5:    bd4df30e9ea432a547295b26a2cc4d28
  * SHA-1:  08f6689afb517e0a2bdaa48433003e62a66ae3c7
  * SHA-256: defd60deda71e957eb8e999dd5f17d027727b45b5e53f18151c5c8cb3ca5518d

RESTORATION NOTE
----------------
Compatible as a direct drop-in replacement using any standard single-rail +5V 2716
EPROM (Intel, AMD, or Motorola); avoid triple-rail TMS2716 chips.
================================================================================

AlexTheCat123

Yeah, the internal ProFile uses the exact same controller architecture as a "real" external ProFile, so you can use the ROMs from one in the other. You can even use the board from an internal ProFile in place of the board in an external ProFile and vice versa; this could be a good troubleshooting aid for if you've ever got a broken one and want to see if it's the drive or the controller that's at fault.