Re: Another help question. power supply

From: Patrick Garber <patnukem_at_email.domain.hidden>
Date: Wed, 21 Mar 2007 15:44:07 -0500

I can see 4 diodes that look like transistors, CR2,CR8,CR10,CR1. CR11 is the biggest one next to the big transformer. I don't know exactly how to test but I tried and all of these 4 seemed to get a reading but the one next to the relay switch CR2? I could not get anything to come on the screen. I guess I will see if there is one of then on something else I have.

Thank you again for your help,

On Mar 21, 2007, at 9:56 AM, tommoni wrote:

> Hi Patrick,
> very very very likely that one of the secondary diodes has a
> shortcut. So before you solder out all the caps, first try to make
> some measurements instead of a try-and-error-repair :-)
> There's only one big dual-diode (looks like a transistor in the
> metal-housing) which is probably the bad one if you describe that
> clicking-sound. It's overcurrent shut-down, because that diode has
> a shortcut. Try to measure with an ohm-meter one of both contacs at
> the soldering side with the housing of that diode. There must be
> one good and one with less than 0,5 ohm. Else try all the diodes
> vertically mounted, they could be bad too
> greetings TOM from Bavaria, the center of europe, the marvellous
> castles of Koenig Ludwig e.g. Neuschwanstein and last but not least
> the original Oktoberfest !
> Am 21.03.2007 um 11:13 schrieb Patrick Garber:
>> Could the "solid state relay" be bad? Because I hear
>> clicking when I hold the power button in. I read this http://
>> Thank you
>> Patrick
> >

--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "LisaList" group. To post to this group, send email to lisalist_at_email.domain.hidden To unsubscribe from this group, send email to lisalist-unsubscribe_at_email.domain.hidden For more options, visit this group at -~----------~----~----~----~------~----~------~--~---

Received on 2007-03-22 10:09:04

This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:13 EST