Re: Macworks Plus 2 without extra PCB ?

From: <rick_at_email.domain.hidden>
Date: Tue, 6 Oct 2009 15:40:15 -0700 (PDT)

The short answer is NO. The MacWorks+2 is not just software, but a hardware and software package that address many of the "issues" that the original MacWorks and MacWorks+ had. The PCB (known as the PFG) also provides a level of security for the package. AFAIK, MW+2 is not in the public domain. If you own a MW+2 package and lost your PFG, I would contact the author, James MacPhail (a member of this group) about your options for replacing the PFG. If you are serious about using MacWorks on your Lisa2/10, investing in a proper MW+2 setup is well worth the investment.

On Oct 5, 12:47 pm, Jos Dreesen <jdr_..._at_email.domain.hidden> wrote:
> Title says it all : is it possible to run MW2 - Plus on a bog standard
> Lisa2/10 ?
>                       Jos

--~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of the LisaList group. The group FAQ is at To post to this group, send email to lisalist_at_email.domain.hidden For more options, visit this group at -~----------~----~----~----~------~----~------~--~--- Received on 2009-10-07 11:10:48

This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:13 EST