On 9/17/13 5:06 PM, Al Kossow wrote:
> Attach the shim stock to the mylar with Scotch Super 77 spray adhesive
duh.. you attach the shim stock to the FOAM and the mylar to the foam, applying the adhesive to the FOAM in both cases. Resist the temptation to smooth out the adhesive you just sprayed with your index finger :-(
> Then use and arbor press or non-metal mallet to punch the discs, mylar side up.
with the 7/16 punch.
You also should MARK the conductive side of the mylar so you don't get mixed up when gluing several strips at a time. Received on 2013-09-18 10:25:18
This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:14 EST