Lisa 2/10 power supply keeps blowing fuses, help?

My Lisa 2/10 blinked off unexpectedly the other day, and upon pulling and disassembling the 1.8A power supply, I found that the 3A 250V buss fuse was blown. I replaced it with one of the same spec (as far as I know; does it need a slow-blow?) and put everything back together...it blew again immediately as soon as I plugged in the power cable. So I replaced the fuse again, and this time, with the PSU still outside of the Lisa, I plugged in power and it blew again. I tried one more, same thing, then stopped serial-killing fuses...

I am not very skilled with component-level troubleshooting, but I removed the PSU board from the metal case and inspected it for anything obvious. No scorchmarks or bad smells. Everything just looks old.

Are there any usual suspects I could try replacing first? I know how to solder but I do NOT know how to identify parts especially in the Digikey catalog or similar. Is there a Lisa expert out there somewhere who might be able to tell me something from a hi-res photo or two?

Thanks,

• MB

--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "LisaList" group. To post to this group, send email to lisalist_at_email.domain.hidden To unsubscribe from this group, send email to lisalist-unsubscribe_at_email.domain.hidden For more options, visit this group at http://groups.google.com/group/lisalist?hl=en -~----------~----~----~----~------~----~------~--~---

. Received on 2015-07-15 16:37:15