Re: Lisa GEMDOS

Worked for me too.

On Mar 23, 12:08 am, gilles <gilles.fe..._at_email.domain.hidden> wrote:
> I remember I activated a dual parallel card for each slot when I tried
> on lisaem but not sure it really helped.
>
> On 22 mar, 15:38, Ray Arachelian <r..._at_email.domain.hidden> wrote:
>
>
>
> > Nama wrote:
> > > Also, I have noticed that a disk image made when the emulator was
> > > ROMless, don't seem to load when ROM's are installed. I've tried ROM's
> > > H, F and the XL one too. I've also tried them using the images from
> > > the on-borard virtual parallel port and the dual parallel port (with
> > > the ROM installed). No go!
>
> > The paths to the boot ROM and the dual parallel port card ROM are stored
> > in the individual preference files, not the global one.
> > So if you've created a ROMless Lisa, it will stay that way until you
> > change that specific preference.
>
> > You shouldn't try to move bootable profile images from the parallel port
> > to the dual parallel port card ports.  Lisa Office Systems stores
> > information to where to boot from in the PRAM (also stored in the
> > individual preferences files), and if you move them, you may get LOS
> > errors on startup.
>
> > I've not been able to get GEMDOS to work on LisaEm 1.2.6.  It crashes
> > the emulator.
> > 1.3.0-DEV crashes while trying to execute opcode 0089 after displaying a
> > white screen with what looks to be a square black cursor in the upper
> > left corner.  Not sure what that's about.

-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist

To unsubscribe from this group, send email to lisalist+unsubscribegooglegroups.com or reply to this email with the words "REMOVE ME" as the subject.