Re: 400KB Lisa floppy drive non operational- felt pressure pad is missing

Geoff,

John Woodall (vintagemicros) has always an 800 KB EPROM even if it's not currently listed- you can send him an email via eBay of even faster: <lenny15_at_email.domain.hidden>

Helmut

On 24 Mrz., 19:32, Geoff Barrall <geoffbarr..._at_email.domain.hidden> wrote:
> Thanks Helmut, that's very clear and helpful. Unfortunately neither of the links you sent have a SunRem 800K EPROM listed so I guess I'll have to wait for that to be available.
>
> Geoff
>
> On Mar 24, 2011, at 11:01 AM, Diogenes45 wrote:
>
>
>
>
>
> > If you choose the address below, you can read everything about the
> > Lisa Lite card.
> > It's not necessary if you have a Lisa 2/10 aka XL.
>
> >http://lisafaq.sunder.net/lisafaq-hw-io_substitution.html
>
> > If you have a Lisa 2/10 then your internal HD should be an Apple
> > Widget hard disk. Otherwise you might have a SUN HD20 as a replacement
> > instead.
> > (Or this:http://lisafaq.sunder.net/lisafaq-hw-exp-scsi_devices.html)-
> > SCSI hard disks don't work with Lisa OS, Lisa OS will simply  ignore
> > them. SCSI drives only work under MacWorks(Plus) and higher.
>
> > If you are using a Mac 800 KB floppy drive in the Lisa, you need a
> > different disk controller 800K EPROM. You can get it from:
> >http://www.vintagemicros.comor:
> >http://stores.ebay.com/VintageMicros
>
> > BTW: You should first test your 800K floppy disk drive in a Macintosh
> > (I use my trusty old Macintosh Plus) all 800KB Mac drives are working
> > in a Lisa, the 400KB drives are fully functional in a Mac Plus (or in
> > an earlier Mac128K, 512K= Fat Mac). Some of them even work in
> > Macintosh II(x) or IIcx. If the 400KB floppy disk drive works properly
> > in a Mac Plus under OS 6.x or 5.x, it should be running fine in a Lisa
> > as well.
> > If the 800 kb floppy drive  is fully functional in a Mac, it should
> > work flawlessly in a Lisa 2/10 with a 800KB (SUNrem) disk controller
> > EPROM.
>
> > I hope, this helps you a little further.
>
> > Helmut
>
> > On 24 Mrz., 16:11, Geoff Barrall <geoffbarr..._at_email.domain.hidden> wrote:
> >> Can you tell me where I could get the SUNrem ROM you mentioned? Will this EPROM work with a standard 800k drive like those used in the Mac Plus and Mac SE?
> >> I'm not sure what a Lisa Lite card is. The Lisa seems to be a 2/10 and the I/O board supports both a integrated Profile and 400k drive.
>
> >> Very much appreciate your help.
>
> >> Geoff
>
> >> On Mar 24, 2011, at 5:59 AM, Diogenes45 wrote:
>
> >>> Hi Geoff,
>
> >>> I had similar problems with my 400KB and 800KB drives- you should have
> >>> a known good 800KB drive (test it in your Mac Plus or Mac 512 KB etc.)
> >>> Then you will need the SUNrem 800KB floppy disk EPROM for the Lisa I/O
> >>> board, otherwise your 800KB floppy won't be recognized by the Lisa.
> >>> As far as you told here you should have a Lisa Lite card.
>
> >>> Helmut
>
> >>> On 23 Mrz., 17:20, Geoff Barrall <geoffbarr..._at_email.domain.hidden> wrote:
> >>>> I'm also having issues with a 400k drive (dated sept 1984) in one of my Lisas. The Lisa is a newer model and has an integrated ProFile above the drive. The floppy drive looks similar to another tested good Lisa floppy drive I have from an earlier model (dated dec 1983) but that drive has a daughter board next to it in it's own Lisa and doesn't seem to work as a replacement (seemed to exhibit random activity) in the newer one. I've also tried a more modern 800k drive which also didn't work (same issue). FInally I tired a 400k drive from a 512k Mac from approx the same era but same issue there. Can anybody provide me with guidance on which kinds of Floppy Drive should work so I can determine if the issue is with drive compatibility or possibly an issue on the I/O board?
>
> >>>> Many thanks,
> >>>> Geoff
>
> >>>> On Mar 23, 2011, at 2:46 AM, Diogenes45 wrote:
>
> >>>>> I have  just examined the 400 KB disk drive: Many of the sub miniature
> >>>>> caps are dried-out (I have a special capacitor tester) - the signal
> >>>>> from the PCB to the R/W heads and vice versa is very weak and
> >>>>> distorted.
> >>>>> I think it's futile to exchange all caps on the board... the best
> >>>>> solution would be a replacement drive (or original Sony controller
> >>>>> board) or even better: an upgrade to a 800KB drive.
>
> >>>>> Helmut
>
> >>>>> On 22 Mrz., 22:56, "Terry Stewart" <te..._at_email.domain.hidden> wrote:
> >>>>>> Helmut,
>
> >>>>>> I do have two non-working drives which aren't worth much to me.  If you like
> >>>>>> I could have a go at extracting the pad from one of them and posting it to
> >>>>>> you?  It's so small posting charges will be trivial.   Would you like me to
> >>>>>> give it a go?
>
> >>>>>> Terry (Tez)
>
> >>>>>> ----- Original Message -----
> >>>>>> From: "Diogenes45" <helmut_p..._at_email.domain.hidden>
> >>>>>> To: "LisaList" <lisalist_at_email.domain.hidden>
> >>>>>> Sent: Wednesday, March 23, 2011 3:28 AM
> >>>>>> Subject: 400KB Lisa floppy drive non operational- felt pressure pad is
>
> >>>>>> missing
>
> >>>>>>> Hello!
> >>>>>>> I have a problem with my 400KB Lisa disk drive: The Read/Write heads
> >>>>>>> have no contact to the magnetic media  because the pressure pad with a
> >>>>>>> small round  piece of felt is missing now,and I have no idea where it
> >>>>>>> is gone.... it's not inside the drive or the Lisa...I have searched
> >>>>>>> everywhere, but I think, it's hard to find such a tiny piece in a
> >>>>>>> large room....no luck so far after many hours of intensive search.
> >>>>>>> Do you have any idea where I can get this small piece?
>
> >>>>>>> Thanks!
> >>>>>>> Helmut
>
> >>>>>>> --
> >>>>>>> -----
> >>>>>>> You received this message because you are a member of the LisaList group.
> >>>>>>> The group FAQ is athttp://lowendmac.com/lists/lisa.html
> >>>>>>> To post to this group, send email to lisalist_at_email.domain.hidden
> >>>>>>> To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
> >>>>>>> For more options, visit this group at
> >>>>>>>http://groups.google.com/group/lisalist
>
> >>>>> --
> >>>>> -----
> >>>>> You received this message because you are a member of the LisaList group.
> >>>>> The group FAQ is athttp://lowendmac.com/lists/lisa.html
> >>>>> To post to this group, send email to lisalist_at_email.domain.hidden
> >>>>> To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
> >>>>> For more options, visit this group athttp://groups.google.com/group/lisalist-ZitiertenText ausblenden -
>
> >>>> - Zitierten Text anzeigen -
>
> >>> --
> >>> -----
> >>> You received this message because you are a member of the LisaList group.
> >>> The group FAQ is athttp://lowendmac.com/lists/lisa.html
> >>> To post to this group, send email to lisalist_at_email.domain.hidden
> >>> To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
> >>> For more options, visit this group athttp://groups.google.com/group/lisalist
>
> > --
> > -----
> > You received this message because you are a member of the LisaList group.
> > The group FAQ is athttp://lowendmac.com/lists/lisa.html
> > To post to this group, send email to lisalist_at_email.domain.hidden
> > To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
> > For more options, visit this group athttp://groups.google.com/group/lisalist

-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist