Re: Damaged? ProFile Drive Motor

From: tommoni <tommoni_at_email.domain.hidden>
Date: Thu, 2 Jan 2014 09:03:27 +0100


Hi Tom,

that's good news!
By the way the blasted capacitor should be replaced with a new one. You can use 0,1mikroFarad or similar e.g. 0,047 up to 0,22 but you have to be carefull with the voltage. The new cap must have the same or better more voltage than the old one. For example the blasted one has 400V= or 230V˜ (means 400 Volt DC or 230 Volt AC) then replace it with a new cap with more voltage and you will see, it will work longer :-)
Don't use bipolar caps with the same data, this cap has to be a film capacitor! That's important!
And be carful, when soldering. You work on parts which usually have high voltage.

By the way: This cap is only for filtering signals from the PSU to the public grid or reverse. You really don't need it, but electric companies think a little bit different. If you ran the PSU without this cap a radio can be disrupted, a.s.o.

greetings: Tom from Bavaria, the country of the famous Octoberfest, the marvellous castles of Koenig Ludwig and the Alps

Am 31.12.2013 um 23:41 schrieb Tom Frikker:

> I've clipped off the busted capacitor, and put everything back
> together. The drive spins up and gets to a solid red light
> consistently, and the grinding sound gets quieter and quieter every
> time I run it. Sounds like it's getting better!
>

-- 
-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist
--- 
You received this message because you are subscribed to the Google Groups "LisaList" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe_at_googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

Received on 2015-07-16 07:42:28

This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:16 EST