Apple Lisa CRT replacement?

Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]

From: <austjeremy_at_email.domain.hidden>
Date: Wed, 17 Jan 2018 02:50:06 -0800 (PST)

I just purchased a Lisa with a broken screen. I would rather not purchase an expensive CRT on eBay. So, I figured I will just use what I have on hand. The closest thing I have is a green monochrome CRT. It has the same number of pins, and is exactly the same size. It also from Clinton. The part numbers are:
1. CE745Z12K31VR
2. CEULC99F1ATE I'm pretty sure the pin out is different. I figure this after it just showed a line during startup. lol

Lisa

1. Green
2. Yellow
3. Brown
4. Black
5. White (Ground)
6. Red
7. Blue

Donor:

1. Empty
2. Blue
3. Black
4. Green
5. Yellow
6. Red
7. White

Are the colors standard? Can I expect this thing to work if I just reroute the wires to match the colors on the donor CRT? Instead of hacking the Lisa video board. I was thinking about using breadboard wires with pins, and connecting them to the Lisa CRT connector. I would then rout the wires from there to a connector with the wires going to the proper pins. If it works, then I would solder things in place.

-- 
-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist
--- 
You received this message because you are subscribed to the Google Groups "LisaList" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe_at_googlegroups.com.
For more options, visit https://groups.google.com/d/optout.



text/html attachment: alternate version of message

Received on 2018-01-17 05:55:16