Re: My Lisa 2/10 won't power on anymore

I don't recall the whirring/buzzing symptom... rapid "clicking" is a common description for a power supply problem, I presume that doesn't fit in this case.

You could unplug the video board and see if the symptoms change. You could also remove memory boards.

It isn't clear if the failure to power-on appeared before or after the recapping project. If before, have the symptoms changed as a result of recapping? If after, how long did the system work before the problem appeared?

I suggest double-checking the parts you replaced to see if any have failed prematurely or were put in the wrong place or backwards.

The COP power is supplied by a small "always on" transformer in the power supply. The fact that the COP has power shows the fuse is good, but doesn't indicate anything about the large switching power supply that is activated by the power switch. It is normal that the voltage adjustment doesn't affect the standby power voltage.

If you put your voltmeter on each of the various voltages on the I/O board (+/-12V and +/-5V) and push the power button briefly, you might (or might not) see a clue as to which voltage isn't working.

Good luck!

James

At 10:39 PM -0800 2/14/18, Rebecca Bettencourt wrote:
>I acquired a Lisa 2/10 a while ago that stopped powering on while I
>was working on fixing the keyboard.
>
>I've recapped the (1.8A) power supply and the video board, and I've
>tried adjusting the voltage on the power supply. No matter what the
>voltage adjustment is set to, all I get is a whirring/buzzing noise
>from the power supply when I press the power button.
>
>Pin 9 of the COP421 shows 5.34V (no matter the adjustment), and I do
>get a signal on pin 12 of U7F when I press the power button. This is
>all with the drive cage removed.
>
>I'm out of ideas for now. What other components should I try
>replacing or things should I check?

-- 
-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist
--- 
You received this message because you are subscribed to the Google Groups "LisaList" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe_at_googlegroups.com.
For more options, visit https://groups.google.com/d/optout.