Re: Where do I get a POWER OK for Widget?

From: Jason Perkins <perkins.jason_at_email.domain.hidden>
Date: Wed, 28 Mar 2018 23:23:25 +0000


I didn't connect that line on the widget I have in an external enclosure and it works fine.

I've only used it with BLU and Xenix, so there might be a status that the Office System looks at but Xenix ignores.

On Wed, Mar 28, 2018 at 6:49 PM James MacPhail <gg__at_email.domain.hidden> wrote:

>
> As far as I can tell:
>
> The DataPower power supply does have a "Power OK" signal on pin 21
> (Labeled "/Power Fail" on the schematic.)
>
> You measure +5 on the pin when the Widget is attached because it is
> pulled up to +5 by R1 on the Widget.
>
> You measure 0V on the pin when the Widget is not attached because it
> is not driven by the power supply (it is an open collector output
> that can only sink current).
>
> This signal doesn't go to the motherboard.
>
> I suppose the simplest approach is to leave the pin unconnected and
> the Widget will pull it high.
>
> HTH,
>
> James
>
> --
> --
> -----
> You received this message because you are a member of the LisaList group.
> The group FAQ is at http://lowendmac.com/lists/lisa.html
> To post to this group, send email to lisalist_at_email.domain.hidden
> To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
> For more options, visit this group at
> http://groups.google.com/group/lisalist
> ---
> You received this message because you are subscribed to the Google Groups
> "LisaList" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to lisalist+unsubscribe_at_googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
Jason Perkins 313 355 0085 Sent from my iPhone

-- 
-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist
--- 
You received this message because you are subscribed to the Google Groups "LisaList" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe_at_googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Received on 2018-03-28 19:27:38

This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:17 EST