Sleeping Lisa

From: Jim Carroll <jcarroll_at_email.domain.hidden>
Date: Mon, 6 Nov 2000 11:24:12 -0800


My Lisa died a few years back and I recently attempted to revive her. I thought I had a bad power supply but just acquired a new one but I still get no power. I thought I read somewhere if your Lisa is not getting power then it is either the power supply or I/O board. Can anyone confirm this. I did remove the leaking batteries on my I/O board and some minor corrosion was present but I checked all the circuit pathways with a meter and all are ok. I also checked the micro switch in front and it seems ok. I don't know how to test the power button, could this be my problem. Any advice on what to check/try next would be appreciated.

Thanks,

  Jim

MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>

Shop buy.com and save. <http://click.linksynergy.com/fs-bin/ stat?id=O7sajHhUCjc&offerid=13541.10000001&type=1&subid=0>

Host your mailing list for free at Maclaunch http://www.maclaunch.com/forms/list.shtml
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
This message is sent to you because you are subscribed to LisaList.  Send list messages to <lisalist_at_email.domain.hidden>  To unsubscribe, send email to: <lisalist-off_at_email.domain.hidden>  To switch to digest mode, send email to <lisalist-digest_at_email.domain.hidden>  Email subscription questions to <listmom_at_email.domain.hidden>  List archive at <http://mail.maclaunch.com/lists/> Received on 2000-11-06 11:33:46

This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:17 EST