Re: uniplus disks imaged

Blair Aakre wrote:
> My Lisa has the H/A8 ROMs, 1MB of RAM, and has a 2-port Parallel card
> in slot 1.
>
> Without documentation, it took a bit of trial and error to get it to
> the point I did.
>
>
I attached the install docs to a previous message, the one with the lisafsh commands, that's all I have for now - was this while using those docs?

More docs will arrive in a couple of weeks, but it'll be a month or two before I can finish scanning them in. (Thanks again John!)
> If I just hit return at the Standalone boot screen, it will boot from
> the boot floppy, but hangs at a similar spot, right after the message
> about the 2 serial ports. (If that is what you mean)
>
>
Yes, wanted to know if by chance you had some hw that it couldn't recognize (SCSI card, etc.) It should like the dual parallel card just fine.

I guess once I get the emulator working again (1.3.0) I might be able to see exactly where and why it hangs and maybe figure out a workaround. It's unlikely, but, I'll give it a try.

> I did have a Sun Remarketing 1.5MB card in there initially, but was
> getting some message about insufficient swap space, so I popped the
> original 512K card back in.
>
Weird, I'd expect it to like 2MB more than 1MB.

--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "LisaList" group. To post to this group, send email to lisalist_at_email.domain.hidden To unsubscribe from this group, send email to lisalist-unsubscribe_at_email.domain.hidden For more options, visit this group at http://groups.google.com/group/lisalist?hl=en -~----------~----~----~----~------~----~------~--~--- Received on 2008-02-23 08:47:43