I swapped out R21 (220K ohm) with a 330K ohm resistor and I am now able to adjust the video height to where it needs to be. Weird, maybe R22 really should be 200K.
-Blair
On Apr 23, 2008, at 9:34 PM, Blair Aakre wrote:
>
> Hi,
> Just tonight I replaced the adjustment pots on the video board on a
> Lisa. However, now I am unable to get the height adjusted properly.
> With the Height POT adjusted as far counter-clockwise as it can go,
> the video appears stretched out vertically, off the top and bottom of
> the screen. I used a 100K ohm POT for R22. (The schematics on the
> internet list this as 200K, but the part I took off was 100K)
>
> Is there some sort of coarse height adjustment somewhere?
>
> Previously, the video worked OK, though it would lose vertical hold
> periodically.
>
> 5V is currently measuring 5.13V. I have "H" ROMs and the standard Lisa
> video ROM.
>
> Any ideas?
>
> -Blair
>
> >
--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "LisaList" group. To post to this group, send email to lisalist_at_email.domain.hidden To unsubscribe from this group, send email to lisalist-unsubscribe_at_email.domain.hidden For more options, visit this group at http://groups.google.com/group/lisalist?hl=en -~----------~----~----~----~------~----~------~--~--- Received on 2008-04-23 20:11:16
This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:21 EST