I'd think the problem with the PSUs is not the temp sensor, but one of the capacitors or perhaps the dual diode. Those parts seem to fail with age more often.

-Jason

On Tue, Aug 9, 2011 at 6:38 PM, "Rudolf Brandstötter" <R.Brandstoetter@gmx.net> wrote:
Hello Lisa fellowers,

I have some repair questions I nowhere found in the well known Lisa documentation... it may be also helpful for others.

1.) I have 2 1.8AMP power supplies that shut down after 5-10 minutes when they are warmed up. When they are warm the Lisa shuts down immediately; if you wait 1h or so it runs again for some minutes.
I read in the owners guide that the PS has a temperature sensor that shuts down the PS if the temperature is over 90°centigrade. My question: where the hell can I find that sensor on the PS? Can you tell me the location? Any experiences with that part?

2.) One Lisa always shows error #52 when starting. The problem is that the COPS chip is not the problem (changed i/o, MB, CPU boards.. and everything with another working Lisa where this problem does not exist). I can only imagine that the cabels inside or the power on/off switch causes this problem. Any experiences with that sympthom?

many thanks for any answers

Rudi

--
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist@googlegroups.com
To leave this group, send email to lisalist+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/lisalist

--
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist@googlegroups.com
To leave this group, send email to lisalist+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/lisalist