For what it's worth:

From the Lisa DIY manual: "Preliminary memory test ... If there's a problem with the
first 2K, the speaker beeps twice and the computer hangs with a random display on
the screen. This indicates a problem  with the memory card in slot 1...."

It doesn't explain the third beep, though. Not sure it applies.

I can't seem to find any reference to a third beep. Maybe someone else on the
list knows?

Bill


On May 3, 2008, at 5:00 PM, Patnukem wrote:


well some good news I was examining the cpu board and decided to  
switch the two 2333's that are directly under the processor with the  
other cpu board.  One I took off and it had two bent in pins "who  
knows why" anyway I put the other chips in and now I get 3 beeps two  
high and one low.  I still do not get a picture but I will mess with  
the monitor controls and see what I get.  I think it was lucky I found  
that the one looked a bit beat up so I was not sure it was working.

Patrick


--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "LisaList" group.
To post to this group, send email to lisalist@googlegroups.com
To unsubscribe from this group, send email to lisalist-unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/lisalist?hl=en
-~----------~----~----~----~------~----~------~--~---