Hi everybody,
long time no post.
I have done some more tests and come to the conclusion the card edge connector for the IO board has to be changed. I waited 3 weeks for 3 connectors to arrive from Korea and today they finally arrived. I have changed the one from the IO Board and all the sockets and capacitors on the IO board but with little success.
No when I press the power button, LISA turns on but only as long I keep the button pressed, as I release it it will go off again.
Any suggestions?
Thanks!
joi, 15 noiembrie 2012, 01:17:32 UTC+2, PSchaefer a scris:
Am Mittwoch, 14. November 2012 20:25:07 UTC+1 schrieb Alex:--On the card edge connector I measure also 0V on the /RESET pin. this means the system is kept in reset state on the motherboard.
There is an electrolytic capacitor (C8) next to the 68000 CPU. Usually it gets leaky, then /Reset is stuck low.
In case you don't have a replacement available, just cut it away. Then you'll have to press the Reset button once to start the CPU (after power-up)
Patrick