Hello James

I too have bought a Floppy Emu rev B to use on my Lisa 2, I can make it work on a Macintosh Classic but have the same issue with trying to use it on my Lisa 2/5, I have written to Stephen Chamberlin and he has directed me to this group to see if anyone else is having the same problem, My Lisa is fully working with working 400K floppy drive so the problem would seem to be with the Floppy Emu 

Tim

On Saturday, 9 September 2017 04:42:46 UTC+1, James Denton wrote:
Hello all,

I am the proud new owner of a Lisa 2/5, and have been unsuccessful in getting the Lisa to read disk images off a connected Floppy Emu (Rev B) device. The internal 400k drive works fine, and the Lisa boots from the ProFile without issue. I have a second ProFile drive that may or may not have data on it, but the Lisa will not boot from it so its hard to say. My goal was to install or boot some utilities from the Floppy Emu to take a look, but any time I load a disk image from the Floppy Emu the Lisa warns me that it cannot recognize the disk and wants to initialize it. I see folks have been successful in using the FloppyEmu, but am wondering if that success has been limited to the 2/10 models only. If any 2/5 owners have this configuration working I'd love to hear about it!

Thanks,
James

--
--
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist@googlegroups.com
To leave this group, send email to lisalist+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/lisalist
---
You received this message because you are subscribed to the Google Groups "LisaList" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.