Does your display still get the wobbles when transmitting?

On Fri, Dec 1, 2017 at 4:32 PM Tom Stepleton <stepleton@gmail.com> wrote:
Hi again,

Not too surprised that there aren't any bites on my bonus mystery. I promise I'm not making it up!

But the main bit of news is that the 26LS30 was the culprit. I've put in a (socketed) replacement and now serial port B is back.

Case closed,
--Tom

On Mon, Nov 27, 2017 at 9:51 PM, Tom Stepleton <stepleton@gmail.com> wrote:
Hi everyone. I've gone ahead and ordered replacement 26LS30s, and I'll be sure to update this thread when I know whether they've solved the problem.

In the meantime, here is a special bonus mystery. Perhaps it's related. It's so strange that I thought I'd share it.

Making use of my one good serial port, I've been using the Pascal Workshop's "Transfer" program to copy some source code from Clascal/ToolKit disk images on Bitsavers over to a modern computer. It makes the code a bit more convenient to read. You can find everything I've transferred over here: http://stepleton.com/Lisa/clascal/

As I transferred all of these files at a stately 9600 BPS, I noticed that vertical lines on the screen became a bit wavy! This was a bit of a surprise---ever since replacing the caps and pots in my PSU and video card, the video has looked great. But when you send data over the serial port, and only when you do that, you can see ripples on the screen.

Here is a video of the phenomenon. It's hard to see---you will need to view the video in full-screen mode, and even then it's tough. Look at the edge of the Transfer program's window, though, and you might be able to make it out. 


(Ignore the "ehehello again" text---that was just me making sure the serial link was up.)

Why on earth would sending data over the serial port cause the screen to go slightly wavy? Bizarre. It only seems to happen on my 2/10---my other Lisa isn't affected.

--Tom

On Mon, Nov 27, 2017 at 12:35 AM, Tom Stepleton <stepleton@gmail.com> wrote:
My friend with the scope came by this evening. What he found leads us to suspect that U10E, the 26LS30, has gone bad. It's receiving a healthy TTL signal from U8A, but the signal it emits varies between -3.85V and -4.2V or so only. Channel 1 in this screenshot (yellow) tells the story:


It looks like replacing U10E would be a good idea. Even though it's an obsolete part, it's not too hard to find on eBay. Still, I thought I'd seek the wisdom of experts to be certain---does this sound like the right thing to do? For what it's worth, there's no sign that U10E's output pin is getting shorted somehow...

Thanks,
--Tom

On Mon, Oct 30, 2017 at 9:31 PM, Tom Stepleton <stepleton@gmail.com> wrote:
Hello again,

Since I don't know for TTL... :-)

...I tried a different strategy. Unless there's a difference between the Z8530PSH that came on the Lisa and the Z8530PS (no H) that I found for cheap somewhere, the SCC was not the culprit after all.

Back to the original strategy: probing! I'll update if I have any discoveries...

--Tom

On Thu, Oct 26, 2017 at 1:37 AM, James MacPhail <gg_@sigmasevensystems.com> wrote:

When no data is transmitted, U9C pin 25 shows 3.66v

For TTL signals, the logic "high" threshold is 2.0V, and "low" is 0.8V.

So, 3.66V is within the specification for a high level TTL signal.

Anything between 0.8 and 2.0V is not high nor low... which is to be expected for a signal in transition but may indicate a problem for a steady state circuit.

High signals are often much closer to 5V, and low signals much closer to 0V; it depends on the parts involved.


--
--
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist@googlegroups.com
To leave this group, send email to lisalist+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/lisalist
--- You received this message because you are subscribed to a topic in the Google Groups "LisaList" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/lisalist/B_AWH9w7WeQ/unsubscribe.
To unsubscribe from this group and all its topics, send an email to lisalist+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.




--
--
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist@googlegroups.com
To leave this group, send email to lisalist+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/lisalist
---
You received this message because you are subscribed to the Google Groups "LisaList" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jason Perkins 313 355 0085 Sent from my iPhone

--
--
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist@googlegroups.com
To leave this group, send email to lisalist+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/lisalist
---
You received this message because you are subscribed to the Google Groups "LisaList" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.