Hello James and Ray,

Thank you for the quick responses!

What I remembered as a list of 1.8A components was probably Tom's 1.2A list here:

https://github.com/stepleton-xx/lisacapcensus/blob/master/620-0120_Power_Supply.txt

When I first went down this path earlier this year, I came across the threads James M. referenced here:

https://groups.google.com/forum/#!topic/lisalist/OJkfK7c50X8 
https://groups.google.com/forum/#!topic/lisalist/x7eAZ97_UPg

Indeed, most of the replacement part numbers in those threads are now obsolete. At the time, I was fortunate to snag a kit from John, so I didn't have to work too hard to find suitable alternatives. I did, however, need to find replacements for C8,C9 and C24-C26.

Given an official list doesn't exist, maybe Ray's suggestion of a spreadsheet or list on the FAQ page would be of benefit to the group? That way, when I ask this question a year from now I'll have somewhere to go.

I've started a spreadsheet here:

https://docs.google.com/spreadsheets/d/1QqrAwDqlG4MLrkZlX9edCv7yYraPHmGf18fRYwF58vQ/edit?usp=sharing

It's read-only, but I'm happy to give write permissions. Or, if anyone wants to maintain it somewhere else that's fine too. If you have known-working part numbers I'm happy to add them as well.

Thanks again,
James D.

 


On Sunday, July 29, 2018 at 3:35:36 PM UTC-4, James MacPhail wrote:

Posted to LisaList in 2007:

https://groups.google.com/forum/#!topic/lisalist/OJkfK7c50X8

If any of those are no longer available, LMK and I'll look for
current alternates.

As capacitor technology improves, they tend to shrink, so you may
need to get a capacitor with a higher voltage rating if direct
equivalents are now too small to fit the hole spacing in the circuit
board.

Also see last message of the following thread for a discussion of
line rated  safety capacitors (replacements for the yellow boxes that
crack):

https://groups.google.com/forum/#!topic/lisalist/x7eAZ97_UPg

Good luck!

James

>A while back I recall reading some threads related to a spreadsheet
>or parts list for components used when refurbishing/rebuilding a
>1.8A Datapower power supply, but can't seem to find them.

--
--
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist@googlegroups.com
To leave this group, send email to lisalist+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/lisalist
---
You received this message because you are subscribed to the Google Groups "LisaList" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.