Re: Screen Stabality Fix

So I'm going to bump this old thread up. I never got the wiggle issue completely sorted out, but as time went on my system developed another interesting issue: Sometimes the scan lines don't line up. It can be made better by adjusting the horizontal phase, but as the system warms up it will get worse, and it is also affected by what is displayed on the screen.

Here's a video I made showing the
problem: https://www.youtube.com/watch?v=MBSTgL1Hj74

Any suggestions? IIRC I replaced the caps in the PSU back in 2005 but now I can't recall exactly if I did all of them or just the main filters.

Thanks!

-J

On Sunday, May 14, 2006 5:53:25 PM UTC-4, compu_85 wrote:
>
> Sorry to start a new thread on this, but it wouldn't let me bump the
> old one.
>
> "Withthe phase control adjusted to the extreme, the addition of a
> capacitor between the base of Q8 and ground will move the image back
> towards the center of the screen. (The left side of R54 is
> equivalent to the base of Q8. The bottom of C5 and the emitter of Q8
> are ground.) The amount of capacitance required will depend on the
> particular machine. 0.02uF (0.02 micro-Farads) is a good starting
> point. "
>
> I have done this, and a .02 and .01 uF cap put the screen at a nice
> alignment. The only problem is that now the whole screen shakes a lot
> when the hard disk power is plugged in (this is a 2/10 with a 1.8A
> unit). Does this indicate my power supply is weak?
>
> -Jason
>
>

-- 
-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist
--- 
You received this message because you are subscribed to the Google Groups "LisaList" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe_at_googlegroups.com.
For more options, visit https://groups.google.com/d/optout.



text/html attachment: alternate version of message