Re: Lisa 2/5 I/O board

From: SeanF <sean.fraz_at_email.domain.hidden>
Date: Wed, 8 Apr 2009 12:59:41 -0700 (PDT)

i had heard that too but didn't see it in Pina's book and i'm not into cutting things unless i know for sure. :)

the MB's are different. 2/5 has the Lisa Lite card and the 2/10 has the floppy controller on the I/O board. Just didn't know if there was a way to get the 2/10 board to work in a 2/5 (without the known mods - wiring harness, MB, etc.).

thanks!

On Apr 8, 3:50 pm, Steve Hatle <sha..._at_email.domain.hidden> wrote:
> On 4/8/09 2:34 PM, "Ray Arachelian" <r..._at_email.domain.hidden> wrote:
>
>
>
>
>
> > SeanF wrote:
> >> so i'm replying to myself here......
>
> >> is there anyway to get my system to boot a floppy?
>
> >> I have a 2/5 with a 2/10 I/O board (everything works except the floppy
> >> drive, my 2/5 I/O board is kaput). I also have an 800k floppy with
> >> ROMs. All disks error out with error 23. I can't believe that all of
> >> my floppies (20 or so) are bad.
>
> > Off the top of my head, I believe the 2/10 motherboard is different than
> > the 2/5 motherboard.
> > You'll need a 2/10 motherboard to use the 2/10 I/O board.
> > Also the 2/10 I/O board shouldn't be used with the Pepsi card or
> > whatever it's called, but it sometimes does work.  Though probably not
> > with the 800k floppy.
>
> > The cables on the inside are different too.
>
> I believe Ray might be on the right track with the cable mention. I'm fuzzy,
> but wasn't there a situation where you needed to cut one wire to get an 800k
> floppy to work in a system that originally had a 400k drive? I can look at
> my Pina book if I need to at home tonight.
>
> Another check is to make sure that you have pin 1 of the cable connector
> connected to pin 1 of the floppy.
>
> Steve
--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "LisaList" group. To post to this group, send email to lisalist_at_email.domain.hidden To unsubscribe from this group, send email to lisalist+unsubscribe_at_email.domain.hidden For more options, visit this group at http://groups.google.com/group/lisalist?hl=en -~----------~----~----~----~------~----~------~--~--- Received on 2015-07-15 16:45:34

This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:15 EST