On 7 Aug., 09:40, "Uwe Krull" <uwe.kr..._at_email.domain.hidden> wrote:
.
> Does this board also replace the Profile ?
> In other words can this board be conected to the parallel port of the Lisa ?
The internal and external parallel ports have the same pinout, but
different connectors. You can connect an internal drive to a 2 Port
parallel card, or a ProFile to the internal port.
The pinouts are "physically" identical, i.e. top row of the 26 pin
header is top row of the Sub-D25f, and bottom row is bottom row.
You'll get it right by itself when using crimp connectors for both
ends.
Or use these pigtails for the printer port which were used with old AT
style PC mainboards.
Patrick
--
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist
Received on 2015-07-15 16:55:42
This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:16 EST