Re: IDEfile PCBs from Adam Rosen on 2011-08-07 (lisalist1)

From: Adam Rosen <adam_at_email.domain.hidden>
Date: Sun, 7 Aug 2011 13:15:53 -0400

Patrick, do you know the estimated cost for the new boards? (Sorry if this was already covered, I've had some email glitches recently...)

On Aug 7, 2011, at 7:25 AM, PSchaefer wrote:

> On 7 Aug., 09:40, "Uwe Krull" <uwe.kr..._at_email.domain.hidden> wrote:
> .

>> Does this board also replace the Profile ?
>> In other words can this board be conected to the parallel port of the Lisa ?

>
> The internal and external parallel ports have the same pinout, but
> different connectors. You can connect an internal drive to a 2 Port
> parallel card, or a ProFile to the internal port.
>
> The pinouts are "physically" identical, i.e. top row of the 26 pin
> header is top row of the Sub-D25f, and bottom row is bottom row.
> You'll get it right by itself when using crimp connectors for both
> ends.
>
> Or use these pigtails for the printer port which were used with old AT
> style PC mainboards.
>
>
> Patrick
>
> --
> -----
> You received this message because you are a member of the LisaList group.
> The group FAQ is at http://lowendmac.com/lists/lisa.html
> To post to this group, send email to lisalist_at_email.domain.hidden
> To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
> For more options, visit this group at http://groups.google.com/group/lisalist

-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist

Received on 2015-07-15 16:55:42