Re: Lisa I/O board troubleshooting, and schematic weirdness

From: Bill Vogel <highcountryrider_at_email.domain.hidden>
Date: Tue, 27 Mar 2012 11:58:12 -0700


And I found the one I cleaned up, should be a little easier to read. http://www.box.com/shared/2mtrtdqpux

Bill

On Mar 27, 2012, at 2:53 AM, PSchaefer wrote:

On 26 Mrz., 05:28, Mr Ian Primus <ian_pri..._at_email.domain.hidden> wrote:

> (...) What's going on here? Are these schematics I have for another
> revision?

There are two sets of schematics floating around in the net. One that has been scanned from original Apple documents, which is difficult to read but correct, and a second one that has been redrawn using some paint program. This one is full of errors, so make sure to use the Apple version (e.g. from bitsavers.org).

Patrick

-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist

"If it is perceived that there is one law for the rich and one law for everybody else, the law will ultimately fall in disrespect." A Man for All Seasons


-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist
Received on 2015-07-16 06:35:03

This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:16 EST