Re: Which set of Unisoft Unix installation disks to use?

Am Mittwoch, 22. August 2012 17:24:26 UTC+2 schrieb Al Kossow:  

> A bit more work last night. The patched boot disk and repaired floppy root
> file system disk
> correctly loaded the system on an X/Profile. The IDEfile wasn't recognized
> at all by the standalone
> copy command on the boot floppy.
>

I can access both my internal and external IDEfile units. The internal one is w(0,0), the one at the upper connector of slot 2 is w(5,0).

So "copz" "" "w(5,0)", <Reset>, apple-3, apple-7 to reboot from dev/p5. "sunix" (with disk A in the drive), <Return>, "p", "5", "./install", "10" -- and then this **!!!@* overwrites my internal hard disk with Uniplus! Swapping is done to dev/p5 as specified, but installation always goes to dev/p0.

So connect your IDEfile to the parallel port on the back or to the Widget cable and use volume type 0 or 1. This should work.

Best regards
Patrick

-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist


text/html attachment: alternate version of message