Re: lisa 2 startup problems

From: Terry Stewart <terry_at_email.domain.hidden>
Date: Wed, 19 Dec 2012 11:29:01 +1300

Bummer,

I don't have any suggestions unfortunately....just posting to empathize. Hope you can get it going.

Terry Stewart (Tez)

On Wed, Dec 19, 2012 at 9:47 AM, Alex <alexandru.flocka_at_email.domain.hidden> wrote:
> Hi everybody,
>
> long time no post.
> I have done some more tests and come to the conclusion the card edge
> connector for the IO board has to be changed. I waited 3 weeks for 3
> connectors to arrive from Korea and today they finally arrived. I have
> changed the one from the IO Board and all the sockets and capacitors on the
> IO board but with little success.
>
> No when I press the power button, LISA turns on but only as long I keep the
> button pressed, as I release it it will go off again.
>
> Any suggestions?
> Thanks!
>
> joi, 15 noiembrie 2012, 01:17:32 UTC+2, PSchaefer a scris:
>>
>> Am Mittwoch, 14. November 2012 20:25:07 UTC+1 schrieb Alex:
>>
>>>
>>> On the card edge connector I measure also 0V on the /RESET pin. this
>>> means the system is kept in reset state on the motherboard.
>>
>>
>> There is an electrolytic capacitor (C8) next to the 68000 CPU. Usually it
>> gets leaky, then /Reset is stuck low.
>>
>> In case you don't have a replacement available, just cut it away. Then
>> you'll have to press the Reset button once to start the CPU (after power-up)
>>
>>
>> Patrick
>>
>>
>>
>>
> --
> -----
> You received this message because you are a member of the LisaList group.
> The group FAQ is at http://lowendmac.com/lists/lisa.html
> To post to this group, send email to lisalist_at_email.domain.hidden
> To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
> For more options, visit this group at
> http://groups.google.com/group/lisalist

-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist
Received on 2015-07-16 07:26:50

This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:16 EST