Re: Lisa 2 repair

Hi James,

The batteries were already removed. I would be more happy with 220V PSU unit but the prices on eBay are extremely high. I wanted also to replace the Profile with like X/Profile that vintagemicros is selling but just could not afford such an upgrade.

Janez

> On 2. jun. 2016, at 21:43, James MacPhail <gg__at_email.domain.hidden> wrote:
>
>
> Since it recently worked ok:
>
> 1) Check the I/O board to see if there are four AA NiCd batteries on it. If so, remove the batteries. If there is any corrosion from battery leakage, repair it. (Do not replace the batteries, they are not required for normal operation, and only cause corrosion problems.)
>
> 2) Clean all the card edge connectors.
>
> If you want to replace the 1.2A PSU with the 1.8A version, you will need to buy one. Look on eBay etc.
>
> Once the computer is operating again, adjust the video controls to see if that is all that is required to fix the video.
>
> Good luck!
>

>> I have Lisa 2. It worked until last year. When I press the power on
>> button it just blinks and nothing happens.

>> I would like to replace video electronics as the video is not
>> strong. And the PSU. PSU is 120V 1.2 Amp.

-- 
-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist
--- 
You received this message because you are subscribed to the Google Groups "LisaList" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe_at_googlegroups.com.
For more options, visit https://groups.google.com/d/optout.