Re: 2/10 serial port B won't transmit

>When no data is transmitted, U9C pin 25 shows 3.66v

For TTL signals, the logic "high" threshold is 2.0V, and "low" is 0.8V.

So, 3.66V is within the specification for a high level TTL signal.

Anything between 0.8 and 2.0V is not high nor low... which is to be expected for a signal in transition but may indicate a problem for a steady state circuit.

High signals are often much closer to 5V, and low signals much closer to 0V; it depends on the parts involved.

-- 
-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist
--- 
You received this message because you are subscribed to the Google Groups "LisaList" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe_at_googlegroups.com.
For more options, visit https://groups.google.com/d/optout.