Car light bulbs are an excellent suggestion for dummy loads! Even though headlamp bulbs are 12v, they can make a great load for the +5v rail.
[image: Inline image 1]
On Sun, Feb 18, 2018 at 7:27 AM, PSchaefer <dr.p.schaefer_at_email.domain.hidden> wrote:
>
> Am Samstag, 17. Februar 2018 01:50:12 UTC+1 schrieb Tom Stepleton:
>>
>> This might be helpful---I was able to carry out a bench test of 1.2A and
>> 1.8A power supplies using the procedure I describe here:
>>
>> https://68kmla.org/forums/index.php?/topic/30781-apple-lisa-
>> doesnt-boot-need-help-troubleshooting/&tab=comments#comment-335026
>>
>> If you do the same, you may be able to isolate the problem to the
>> PSU---or get closer to ruling it out. Do make sure you have resistors that
>> are up to dissipating all that power, though
>>
>
> For PSU testing I use vehicle lightbulbs as dummy loads. You certainly
> know these spares boxes with lightbulbs where you need one or two for your
> car and the others are never used? Solder wired to them with alligator
> clips or 4mm plugs and put them onto a heat-resistant surface.
>
>
> IIRC a Lisa with I/O board removed will start up immediately (ignoring the
> power switch) and generate a raster, but selftest hangs. That mode can be
> used to probe voltages in-situ with most of the load applied.
>
>
> --
> --
> -----
> You received this message because you are a member of the LisaList group.
> The group FAQ is at http://lowendmac.com/lists/lisa.html
> To post to this group, send email to lisalist_at_email.domain.hidden
> To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
> For more options, visit this group at http://groups.google.com/
> group/lisalist
> ---
> You received this message because you are subscribed to the Google Groups
> "LisaList" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to lisalist+unsubscribe_at_googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
-- Jason Perkins 313 355 0085 -- -- ----- You received this message because you are a member of the LisaList group. The group FAQ is at http://lowendmac.com/lists/lisa.html To post to this group, send email to lisalist_at_email.domain.hidden To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden For more options, visit this group at http://groups.google.com/group/lisalist --- You received this message because you are subscribed to the Google Groups "LisaList" group. To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe_at_googlegroups.com. For more options, visit https://groups.google.com/d/optout.Received on 2018-02-18 13:33:26
- text/html attachment: alternate version of message
(image/png attachment: image.png)
This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:17 EST