Re: My sick 2/10

From: Macmoni <macmoni_at_email.domain.hidden>
Date: Sun, 28 Nov 2004 09:36:51 +0200

Hi Jason,

it's very likely the PSU itself.
Check the PSU with shortcut of PIN 20 (component side) and at the same position below X (bottom side) of the PSU board. These two connectors have to be shortcut; that's the trick to get the PSU work in stand-alone-mode

Measure PIN 13up to18 = Ground
with
PIN 20 5V Standby
PIN 19 -5V
PIN 11or12 +5V
PIN 9or10 +12V
and at the bottom side PIN W (the 4th from right side) = -12V

Be careful: High Voltage !

greetings TOM from Bavaria

-- 
LisaList is sponsored by <http://lowendmac.com/> and...

Shop buy.com and save. <http://lowendmac.com/ad/buy.com.html>

      Support Low End Mac <http://lowendmac.com/lists/support.html>

LisaList info:          <http://lowendmac.com/lists/lisa.html>


  --> AOL users, remove "mailto:"


Send list messages to:  <mailto:lisalist_at_email.domain.hidden>
To unsubscribe, email:  <mailto:lisalist-off_at_email.domain.hidden>
For digest mode, email: <mailto:lisalist-digest_at_email.domain.hidden>
Subscription questions: <mailto:listmom_at_email.domain.hidden>
Archive: <http://www.mail-archive.com/lisalist%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Received on 2004-11-28 00:50:30