Re: Parallel Card problems

I have some contact cleaner and I'll give it a go...Thanks

On May 25, 2006, at 10:43 PM, Guido Deiana wrote:

>
> Hi,
> it's happen on a couple of Lisa. The problem is normally got due a
> not perfect contact or for the oxidation of some pins of the Zif
> socket.
> Some of the lines used by the Parallel card are different from these
> used by the SCSI card: this is why sometimes happen that the SCSI
> board works on a slot and a Parallel bord not on the same slot.
> I've solved using or a good contact cleaner or an oxidant remover
> as "Sidol".
> Ciao,
>
> Guido Deiana
> Padova, Italy
>
> At 15.18 25/05/2006, you wrote:
>
>> I have just acquired an Apple 2 port Parallel card so that I can hook
>> up my X/Profile and my newly built IDEfile. The problem is that the
>> card only works in slot 2.
>> Slot 1 produces error 10738 when trying to boot from either the
>> X/Profile or IDEfile. The card is not even recognized in slot 3.
>> Slot 2
>> seems to work perfect however. The problem is I need slot 2 for my
>> SCSI
>> card and drive, otherwise it won't fit.
>>
>> Anybody had a similar problem?
>>
>> Thanks
>>
>> Phil
>>
>>
>>
>
> >

--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "LisaList" group. To post to this group, send email to lisalist_at_email.domain.hidden To unsubscribe from this group, send email to lisalist-unsubscribe_at_email.domain.hidden For more options, visit this group at http://groups.google.com/group/lisalist -~----------~----~----~----~------~----~------~--~--- Received on 2006-05-26 00:38:08