Re: Parallel Card problems

Hi,
it's happen on a couple of Lisa. The problem is normally got due a not perfect contact or for the oxidation of some pins of the Zif socket. Some of the lines used by the Parallel card are different from these used by the SCSI card: this is why sometimes happen that the SCSI board works on a slot and a Parallel bord not on the same slot. I've solved using or a good contact cleaner or an oxidant remover as "Sidol". Ciao,

Guido Deiana
Padova, Italy

At 15.18 25/05/2006, you wrote:

>I have just acquired an Apple 2 port Parallel card so that I can hook
>up my X/Profile and my newly built IDEfile. The problem is that the
>card only works in slot 2.
>Slot 1 produces error 10738 when trying to boot from either the
>X/Profile or IDEfile. The card is not even recognized in slot 3. Slot 2
>seems to work perfect however. The problem is I need slot 2 for my SCSI
>card and drive, otherwise it won't fit.
>
>Anybody had a similar problem?
>
>Thanks
>
>Phil
>
>
>

--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "LisaList" group. To post to this group, send email to lisalist_at_email.domain.hidden To unsubscribe from this group, send email to lisalist-unsubscribe_at_email.domain.hidden For more options, visit this group at http://groups.google.com/group/lisalist -~----------~----~----~----~------~----~------~--~--- Received on 2006-05-26 00:38:08