Re: Parallel Card problems

Thanks for the info David.

Yes. Two hard drives.
IDEfile (connected to a CF adaptor with a 64mb card with a 10m Profile partition running LisaOS7.7),
and an X/Profile Drive with a similar setup. Both devices are known to work well when using just my Lisa's onboard parallel port.

Slot 3 gives error 10737
Slot 2 works well
Slot 1 card not seen

I cleaned down the contacts. Nothing changed. I also tried another motherboard, but this seemed to experience the same problems as above. This makes me assume that it's probably not a problem with the contacts, however more investigation is needed.

When the error occurs the computer is starting to load the OS, but I never see any onscreen indication that anything has actually loaded i.e. No boot screen but lots of LED activity on the drives.

Cheers

Phil

--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "LisaList" group. To post to this group, send email to lisalist_at_email.domain.hidden To unsubscribe from this group, send email to lisalist-unsubscribe_at_email.domain.hidden For more options, visit this group at http://groups.google.com/group/lisalist -~----------~----~----~----~------~----~------~--~--- Received on 2006-05-26 00:38:21