Re: Install MacWorks XL 3.0 on XProfile

>Booting the Emulator from the disks works very well, but the Hard disk is
>not shown.

>Do I need an other disk(image) to format the drive ?

You need to run the application named "Hard Disk Install" to prepare the Widget (or ProFile or X/ProFile) for use by MacWorks XL.

At least, this is how one does it with a real Lisa, perhaps there is a further trick for the emulator.

Hard Disk Install is (should be) on the MacWorks XL System Disk (2.0 and later), so you:

1. "startup from" the MacWorks XL Boot Disk, then
2. insert the System Disk to load the Macintosh System, then
3. run Hard Disk Install from the Finder

If the hard disk is shared with a Lisa partition (Office System or Workshop), then you will need to use the MacWorks XL Boot Disk each time you want to run MacWorks XL.

If the disk is not shared, you will be prompted to insert the MacWorks XL Boot Floppy; thereafter, you may "startup from" the hard disk to load MacWorks XL.

James

James MacPhail                   "Think not of engineering as art,
uo957_at_email.domain.hidden                 but of art as engineering"
Sigma Seven Systems Ltd.
james_at_email.domain.hidden        <http://SigmaSevenSystems.com>

--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "LisaList" group. To post to this group, send email to lisalist_at_email.domain.hidden To unsubscribe from this group, send email to lisalist-unsubscribe_at_email.domain.hidden For more options, visit this group at http://groups.google.com/group/lisalist?hl=en -~----------~----~----~----~------~----~------~--~--- Received on 2007-07-19 15:41:18