Re: Installing LOS - actual problems

From: shaqtopz <shaqtopz_at_email.domain.hidden>
Date: Mon, 26 Nov 2007 08:09:45 -0800 (PST)

Best stuff to use on edge connectors, or any connectors is DeoxIT. On edge connectors I use the deoxIT GOLD wipes and pen. Product actually chemically improves connections after cleaning them. www.deoxit.com
Mike

On Nov 20, 11:44 pm, James MacPhail <g..._at_email.domain.hidden> wrote:
> >install LOS 3.1 .. but I ran into some problems.
> >start install.. then the install programm stops - Lisa office system could
> >not be installed
>
> I don't know/recall what specifically can cause that behaviour, but the
> things that come to my mind as suspects are:
>
> a) is the floppy disk unlocked? (The installer needs to write the serial
> number onto the disk)
>
> b) enough memory? (you need 1MB or more for LOS)
>
> c) is the widget completely working... will it boot into MW XL 3.0? Even if
> it does, it may have bad sectors. What messages are shown before it fails?
> (Has it started to initialize the drive when it fails?)
>
> d) is the floppy drive working ok? (old grease removed and re-lubricated)
>
> e) Poor/dirty contacts cause all sorts of Lisa problems. If all else fails,
> try cleaning the edge connectors for the CPU, I/O, and mother boards with
> electroniccontact cleaner.
>
> >Do I have to make a special format of the disk before?
>
> Installing the OS will initialize the hard drive by writing zeros to all
> the sectors; you don't need to do anything to the hard drive before the
> installation, but it does need to be a good drive.
>
> HTH,
>
> James
>
> James MacPhail "Think not of engineering as art,
> uo..._at_email.domain.hidden but of art as engineering"
> Sigma Seven Systems Ltd.
> ja..._at_email.domain.hidden <http://SigmaSevenSystems.com>

--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "LisaList" group. To post to this group, send email to lisalist_at_email.domain.hidden To unsubscribe from this group, send email to lisalist-unsubscribe_at_email.domain.hidden For more options, visit this group at http://groups.google.com/group/lisalist?hl=en -~----------~----~----~----~------~----~------~--~---

. Received on 2015-07-15 16:42:46

This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:15 EST