Re: Lisa GEMDOS

From: gilles <gilles.fetis_at_email.domain.hidden>
Date: Wed, 24 Mar 2010 16:06:38 -0700 (PDT)

gem not booting may be a problem in assign.sys file. I now get other error messages : Invalid system ID or something like that...

gilles a écrit :
> I've updated a bit the image.
> more files (mince.prg)
> corrected the fish (rewrite boot sector at the end of process)
>
> But, still problems to access profiles. and desktop.app crashes in
> error 47.
> I did not test on real hardware... I could not write properly on
> floppy and
> the process is a bit long (HFS explorer on PC to create a mac 1.44
> floppy,
> read on PPC 6200, write with disccopy 4.2... now I remember why I
> wanted
> a nubus IP card for this mac :) )
>
>
> On 23 mar, 02:16, Nama <forums6..._at_email.domain.hidden> wrote:
> > Worked for me too.
> >
> > On Mar 23, 12:08 am, gilles <gilles.fe..._at_email.domain.hidden> wrote:
> >
> >
> >
> > > I remember I activated a dual parallel card for each slot when I tried
> > > on lisaem but not sure it really helped.
> >
> > > On 22 mar, 15:38, Ray Arachelian <r..._at_email.domain.hidden> wrote:
> >
> > > > Nama wrote:
> > > > > Also, I have noticed that a disk image made when the emulator was
> > > > > ROMless, don't seem to load when ROM's are installed. I've tried ROM's
> > > > > H, F and the XL one too. I've also tried them using the images from
> > > > > the on-borard virtual parallel port and the dual parallel port (with
> > > > > the ROM installed). No go!
> >
> > > > The paths to the boot ROM and the dual parallel port card ROM are stored
> > > > in the individual preference files, not the global one.
> > > > So if you've created a ROMless Lisa, it will stay that way until you
> > > > change that specific preference.
> >
> > > > You shouldn't try to move bootable profile images from the parallel port
> > > > to the dual parallel port card ports.  Lisa Office Systems stores
> > > > information to where to boot from in the PRAM (also stored in the
> > > > individual preferences files), and if you move them, you may get LOS
> > > > errors on startup.
> >
> > > > I've not been able to get GEMDOS to work on LisaEm 1.2.6.  It crashes
> > > > the emulator.
> > > > 1.3.0-DEV crashes while trying to execute opcode 0089 after displaying a
> > > > white screen with what looks to be a square black cursor in the upper
> > > > left corner.  Not sure what that's about.

-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist

To unsubscribe from this group, send email to lisalist+unsubscribegooglegroups.com or reply to this email with the words "REMOVE ME" as the subject.
Received on 2015-07-15 16:47:39

This archive was generated by hypermail 2.4.0 : 2020-01-13 12:15:15 EST