Re: foam pads. was: Successful keyboard jack repair

On Sunday, March 8, 2015 at 1:38:49 PM UTC-4, Simon Claessen wrote:
>
> well, I just took my calipers and measured some still springy objects.
> there was not much variation in the thickness, but of course this could
> be a later (around 1983) production run, as this specific one is used in
> the Holborn 6100.
> in this setup the pad sits just slightly above the three white corner
> pieces of the key plunger.
>

My 5mm foam pieces extend slightly more than 1/16" past the white corner pieces with the key depressed.

-- 
-- 
-----
You received this message because you are a member of the LisaList group.
The group FAQ is at http://lowendmac.com/lists/lisa.html
To post to this group, send email to lisalist_at_email.domain.hidden
To leave this group, send email to lisalist+unsubscribe_at_email.domain.hidden
For more options, visit this group at http://groups.google.com/group/lisalist
--- 
You received this message because you are subscribed to the Google Groups "LisaList" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lisalist+unsubscribe_at_googlegroups.com.
For more options, visit https://groups.google.com/d/optout.



text/html attachment: alternate version of message